BLP's Lifting & Rigging Industry Blog

New Product Annoucement: Tubing Grabs for Well Servicing

Bishop Lifting Products is excited to announce the latest innovation in well servicing -- Crosby's Tubing Grab. Read more about the features and warnings here. 

Tubing grab holding tubing2

HOW IT WORKS:

The tool clamps onto the well tubing just behind the upset and is used to move the tubing to and from the rig floor. Keeping the tube horizontal, the grab allows handlers to move the tubing to the rig floor so the elevators can be attached and stand the tubing upright. The Tube Grab can also be used in the reverse. It is not designed to move the tubing to the vertical. 

To install on tubing, pull the trigger fully, and press the jaws over the tubing. Release the trigger and verify the trigger is fully in the locked or forward position prior to applying a load. The operator’s hands must be free of the grab prior to applying the load. The grab must be installed adjacent to the flared end of the tubing or the coupler.  Do not attempt to attach the grab directly to the larger diameter flared end or the coupler.

FEATURES:

  • Devices to lift 2-3/8" and 2-7/8" tubing.
  • Engages with upset end of tubing.
  • WLL: 500 lbs.
  • Fitted with Crosby Shackle for attachment to air tugger line.
  • For the oilfield well servicing market.


Read more here.  

For pricing and questions on Tubing Grabs contact:
Permian Basin & South Texas:
Billy Bob Anderson - billybob@lifting.com 432-258-2535
Oklahoma & Rockies:
Bill Ray - bill.ray@lifting.com 405-426-2440

Tags: Crosby, Bishop Lifting Products, well servicing, tubing grab, well servicing tools